ITH Christmas stocking for Cutlery embroidery design

By knowing the speed of your embroidery machine, you can find out how long it will take to embroider a design.
To use the embroidery calculator, click on the number of stitches in the product description.

Size: 127.9x172.3 mm (5.04x6.78 "), Stitches: 20004
Formats: .dst, .jef, .pec, .vip, .hus, .pes, .exp, .sew, .dat, vp3, xxx

ITH Christmas stocking for Cutlery embroidery design will help you decorate your Christmas table in an original way. Create this ornament from felt. You will not have to make any effort, we did everything for you, as this Christmas decoration is embroidered right in the hoop and is immediately ready for use.

Please note we used Silver Glitter decorative felt. This means that on the front side it is decorated with a shimmering layer that gives the impression of a shiny, glossy surface.

Instruction:

~ Hoop a thick stabilizer.

~ Turn on the machine, it will embroider the circuit.

~ Put a piece of felt on the place where the machine marked the Christmas sock.

~ Turn on the machine, it will sew the felt to the stabilizer.

You can cut the felt at a distance of 1/3 Inches from the line. You may do it at the end of the embroidery.

~ Embroider the design.

~ When the last color remains (this is another line), you need to put another piece of felt down, under the embroidery frame, with the front side on the embroidery unit. This will be the wrong side of our Christmas sock for cutlery.

~ Turn on the machine and sew this piece of felt.

~ Get the hoop out of the machine. Take the scissors with a jagged edge and cut the sock in a circle.

Your Christmas cutlery boot is ready.

This design has been tested and reviewed to ensure top quality. Test stitch the design, or portions of it, before stitching it onto your final item, as results may vary depending on fabric and stabilizer combination.

Please don't sell or trade the embroidery file.