Cute Unicorn on a skateboard - 2 sizes

By knowing the speed of your embroidery machine, you can find out how long it will take to embroider a design.
To use the embroidery calculator, click on the number of stitches in the product description.

Size: 128.0x150.4 mm (5.04x5.92 "), Stitches: 21045
Size: 148.1x174.2 mm (5.83x6.86 "), Stitches: 25389
Formats: .dst, .jef, .pec, .vip, .hus, .pes, .exp, .sew, .dat, .vp3, xxx

It’s good enough for embroidery machines: Janome, Babylock, Brother, SWF, Jack, Feiya, Melco, Elna, Bernina, Ricoma, Pfaff, Husqvarna, Happy, Tajima, and others.

To achieve a perfect result, use the Madeira Cotton Fix Tear Away Stabilizer or Madeira Cotton Stable Tear Away Stabilizer, which are glued with an iron and tear off at the end of the embroidery.

Colorful, bright and so girlish, the design with a unicorn is simply created for embroidery on a T-shirt, body, sweatshirt or hoody. It can also decorate accessories, for example, textile bags made of thick fabrics.

And the smallest princesses can come up with an original pad in the crib, decorated with this design, and embroidered with ribbons and beads.

Machine embroidery on sweatshirt

Since the sweatshirt is a stylish and most importantly warm accessory, you should definitely decorate it with this wonderful embroidery and present it to your little fashionista. And today we will tell you how to do it.

We have prepared instructions for you that will help you quickly and easily cope with such an embroidery project.

1. If the sweatshirt is new, be sure to wash it BEFORE embroidery. Since often sweatshirts have a cotton base, which is characterized by a high coefficient of shrinkage. And if you wash it for the first time with embroidery, the work will be spoiled. In addition, the synthetic part of the fibers can shed, thereby also spoiling your embroidery.

2. Take a printed design pattern such and air-erase pen or tailor’s chalk.

3. Move the center mark and draw the axis direction lines.

4. Take the Madeira Super Strong Cut Away Stabilizer or the self-adhesive Madeira Cotton Fix Tear Away Stabilizer.

5. Smooth the fabric of the sweatshirt as much as possible.

6. Glue the stabilizer to the wrong side of the sweatshirt. Attach cut-away spraying it with the glue of a temporary fixation, or tear-away, removing the protective film from above.

7. Hoop the fabric with the stabilizer, place the hoop in the machine.

8. Roll up the remaining fabric of the sweatshirt, fasten with embroidery clips.

9. Embroider a design.

10. Unhoop the product and turn it off.

11. Remove excess stabilizer from the wrong side.

12. Turn the product on the front side and iron the embroidery with a slightly hot iron.

Unicorn on a skateboard Embroidery Design on a sweatshirt is ready!