Free Floral Machine Embroidery Design – Outline Bouquet

By knowing the speed of your embroidery machine, you can find out how long it will take to embroider a design.
To use the embroidery calculator, click on the number of stitches in the product description.

Free Floral Machine Embroidery Design includes one vertical outline bouquet in one size. The digital download contains 12 machine formats; this $0 design is available as a bonus when the basket includes at least $3 in paid designs. No finished embroidered item is supplied.

Size: 100.2x178.8 mm (3.94x7.04 "), Stitches: 8525
Formats: pes, .pec, .hus, .vip, .dst, .exp, .sew, .dat, .vp3, .jef, xxx, art

Here is a link to the freebies free machine embroidery designs download

The free designs in store are available for customers who purchased other designs, as a bonus.

You can add all free designs to the basket with a purchase not less than 3$. Sorry, separately, free without order designs cannot be loaded.

Design Specifications

The product page gives the exact file count of 8525 stitches, while the technical map displays a rounded total of 8500. This description retains the product-page value.

What the Design Depicts

The composition is a tall, airy floral branch with three open flowers, heart-shaped leaves, fine veins, small sprigs and curling stems. Most of the fabric remains visible between the stitched lines, so the motif looks decorative without producing a heavy solid panel.

The vertical format works well at the end of a table runner, along the side of a cushion, on an apron panel, tote bag, guest towel or framed textile picture. On garments, check the full 178.8 mm height against seams, pockets and the machine arm before hooping.

Hoop Compatibility and Exact Clearance

Critical 130x180 mm note: when perfectly centered, the 178.8 mm side leaves only 0.6 mm at each end. Check the machine’s actual embroidery field, load the file before hooping and run the complete boundary trace. If the machine reports that the design is too large or the trace approaches the hoop edge, use a 140x200 mm or larger field.

Madeira Classic Rayon No. 40 Color Conversion

The supplied technical map labels its three sequence colors as Meadow Green 247, Dark Green 248 and Sienna 258. These are source-program palette numbers, not Madeira codes. The table below gives close, practical Madeira Classic Rayon No. 40 matches and clearly separates them from the original file labels.

Programmed sequence: 247 Meadow Green → 248 Dark Green → 258 Sienna. The machine makes two color changes and no color returns later in the sequence.

To reproduce the brighter red flowers shown in the stitched photograph: use Madeira Classic Rayon No. 40 1146 Tomato Red instead of 1058 Sienna for the third block. This is a direct substitution and does not add another machine stop.

The HTML squares are approximate screen representations. Select thread by Madeira number because monitors cannot reproduce the sheen and exact color of rayon thread.

Retail Madeira Stabilizers for Home Embroidery

This is an open design with 8525 stitches spread over a tall area, so stable woven fabric normally needs less backing than a dense filled motif of the same size. The critical issue is not bulk but preventing the long stems and satin outlines from drifting out of registration.

More technical guidance: Madeira Cotton Soft and Cotton Fix, Madeira Super Strong cut-away, Madeira Avalon water-soluble stabilizers and the stabilizer selection guide.

Needle, Speed and Registration

• use Madeira Classic Rayon No. 40 or another standard No. 40 machine embroidery thread;
• start with a new 75/11 embroidery needle on woven cotton or linen; use a suitable ballpoint embroidery needle on knit;
• begin at approximately 600–700 stitches per minute and slow down if a narrow satin outline begins to shift or pull the fabric;
• hoop the fabric and backing evenly without stretching or drum-tight distortion;
• support the free end of a runner, towel or garment so its weight cannot pull against the carriage;
• run a full test with the same fabric, backing, needle and thread planned for the finished item.

Do not judge registration from the first green block alone. The second green adds stronger contours to selected leaves and stems, while the third block finishes the three flower outlines. If the later contours shift consistently in one direction, re-hoop and check fabric movement before changing thread tension.

How to Add the Free Design to an Order

1. add this $0 design to the basket;
2. add paid embroidery designs totaling at least $3;
3. complete checkout and download the ZIP archive from the order email or customer account;
4. unzip the archive and transfer only the format required by the embroidery machine.

This product page offers the design as a purchase bonus; it cannot be downloaded separately from this store item without a qualifying order. Browse the free machine embroidery designs section for other bonus files.

Matching Floral Machine Embroidery Designs

Contour Roses Set – 3 Sizes

Pink Roses Corner – 3 Sizes

Climbing Roses Corner – 2 Sizes

Blue Flowers Set – 4 Sizes

Frequently Asked Questions

Design author: Ludmila Konovalova, Royal Present Embroidery.