Free One-Color Royal Crown Machine Embroidery Design for Towels — 2 Sizes

Free Royal Crown Machine Embroidery Design is a one-color digital embroidery file featuring a tall crown and ornamental scrollwork. Two sizes are included for decorating hand towels, terry bath towels, bathrobes, spa textiles, hotel linens, and personalized fabric gifts. This is a digital file for an embroidery machine, not a finished embroidered product.

The elongated composition works particularly well near the lower edge of a hand towel, on the back of a bathrobe, or as the central motif of a coordinated bathroom set. Verified buyers have specifically used this design for hand towels and described the finished embroidery as beautiful and cleanly stitched.

Sizes and Machine Formats

Size: 72.1x177.9 mm (2.84x7.00 "), Stitches: 9303
Size: 88.3x218.5 mm (3.48x8.60 "), Stitches: 11328

Formats: .dst, .jef, .pec, .vip, .hus, .pes, .exp, .sew, .dat, .vp3, xxx

All listed sizes and formats are included in one ZIP archive. You do not need to select a size or format before adding the design to the cart.

Hoop Requirements

Size 72.1x177.9 mm (2.84x7.00") — Hoop: 130x180 mm, commonly called a 5x7" hoop.
Size 88.3x218.5 mm (3.48x8.60") — Hoop: 140x220 mm, commonly called a 5.5x8.6" hoop.

How to Embroider the Crown on a Terry Towel

1. Mark the vertical centerline and embroidery center on the towel.
2. Hoop a medium-weight tear-away stabilizer by itself. Keep it flat and secure without stretching it.
3. Apply a light coat of temporary embroidery adhesive to the stabilizer. Spray away from the embroidery machine and wait a few seconds.
4. Float the terry towel over the hooped stabilizer, match the placement marks, and press it gently into position.
5. Place a thin water-soluble topping over the right side of the towel. The topping holds down the terry loops and prevents the crown’s stitches from sinking into the pile.
6. Use a basting box around the design if your machine or embroidery software provides this function.
7. Stitch the design, keeping the remaining towel away from the hoop carriage and machine arm.
8. After embroidery, carefully remove the tear-away backing while supporting the stitches.
9. Tear away the excess topping. Remove small pieces trapped inside the scrollwork with a damp cloth or during the first wash.

Recommended Stabilizer Examples

Water-soluble topping for terry towels: Madeira Avalon Film, Sulky Solvy, Gunold SOLVY Film, or OESD StitcH2O Water Soluble Topper.

Tear-away backing: Madeira Cotton Soft, Sulky Tear-Easy, OESD Medium Weight TearAway, or Gunold STIFFY.

Water-soluble topping is placed above the terry fabric. It does not replace the tear-away backing underneath the towel.

Do Smooth Towels Need Water-Soluble Topping?

A water-soluble topping is generally unnecessary on smooth cotton, linen, or flat-weave towels without raised loops. Hoop the smooth towel together with tear-away stabilizer whenever possible.

If the finished towel is too bulky or difficult to hoop, hoop the tear-away stabilizer first, apply temporary adhesive to the stabilizer, and float the towel over it. Add topping only if the fabric has a noticeable texture that could hide the stitches.

Thread and Color Suggestions

This one-color design looks elegant in gold, silver, burgundy, navy blue, black, white, or tone-on-tone thread. Use 40 wt polyester embroidery thread for towels and bathrobes that will be washed frequently. Rayon thread provides a softer, glossier finish and is better suited to decorative guest towels or presentation pieces.

Placement Ideas

• Center the crown above the decorative band of a hand towel.
• Place the larger size vertically on the back of a terry bathrobe.
• Create matching towels using a different thread color for each family member.
• Add separately purchased initials beneath the crown for a personalized spa or wedding gift.
• Use metallic-look polyester thread for hotel, salon, or luxury bathroom textiles.

Measure the entire combined composition before adding initials. An alphabet or font is not included with this crown design.

Helpful Machine Embroidery Guides

Read the detailed guide to choosing stabilizers for machine embroidery for more information about tear-away and water-soluble materials.

For correct floating and adhesive application, see the article about temporary adhesive sprays for machine embroidery. It includes Gunold KK 100, Odif 505, Sulky KK 2000, and other examples.

Related Towel Embroidery Designs

Pair the crown with the Art Nouveau Towel Ornament Machine Embroidery Design to create an elegant vintage towel set with coordinated ornamental scrollwork.

For a lighter decorative band, see the Towel Pattern Machine Embroidery Design in 3 sizes. This paid design can also be added to the order when qualifying for the free crown download.

Frequently Asked Questions

Does the first size fit a 5x7 hoop?

Yes. The 72.1x177.9 mm (2.84x7.00") file fits a 130x180 mm embroidery field, commonly marketed as a 5x7" hoop.

Does the larger size fit a standard 5x7 hoop?

No. The 88.3x218.5 mm (3.48x8.60") size requires a 140x220 mm or 5.5x8.6" embroidery field.

Do I need water-soluble topping on a terry towel?

Yes. Place topping above the terry surface to keep the loops flat and prevent the stitches from disappearing into the pile.

Do I need topping on a smooth linen towel?

Usually not. Smooth linen or cotton without raised texture normally requires only suitable tear-away backing.

Can I download the design without adding it to the cart?

No. Add the $0 design to the cart together with paid designs totaling at least $3, and complete checkout.

Is a monogram font included?

No. The download contains the crown and ornamental scroll design in the listed sizes and formats. Letters and fonts are not included.